- Details
- Last Updated: Friday, 11 July 2014 14:52
Bisque
- DT-661 6" Bisque Tile
- SC-6 Sunkissed
- SC-12 Moody Blue
- SC-15 Tuxedo
- SC-6 Cotton Tail
- SC-74 Hot Tamale
- CG-788 Dutch Enamelware
- S-2101 Crystal Clear Brushing
- CB-106 #6 Script Liner
- CB-110 #10/0 Liner
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponges
- AC-230 Clay Carbon Paper
- Designer: Marcia Roullard
- Skill Level: Basic
- Time: 1½ hours
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- With a pencil and AC-230 Clay Carbon Paper trace on the design or sketch on your own.
- For the placement of the primary colors: Using a CB-106 #6 Script Liner, apply 3 coats of SC-6 Sunkissed, on the far left tail feather on the bird skip one tail feather, apply 3 coats of SC-74 Hot Tamale on the center of the birds tail feather. Skip one tail feather to the right of the SC-74 Hot Tamale tail feather and apply 3 coats of SC-12 Moody Blue. So now every other tail feather should have a primary color on them.
- For the feather between the primary colors, the colors will be mixed to create these colors. Orange – mix SC-74 Hot Tamale with some SC-6 Sunkissed. Purple - mix SC-74 Hot Tamale and SC-12 Moody Blue. Green - mix SC-6 Sunkissed and SC-12 Moody Blue. Visually the wet glaze will mimic the fired color, so mix according.
- For the foreground, stipple the blue side with SC-12 Moody Blue and SC-6 Sunkissed, and the red side with SC-74 Hot Tamale, and SC-6 Sunkissed.
- The body of the peacock is the mix of SC-74 Hot Tamale, SC-12 Moody Blue and SC-16 Cotton Tail.
- Using a CB-604 #4 Soft Fan, apply 1 coat of CG-788 Dutch Enamelware to the sky area of the tile.
- Using a CB-110 #10/0 Liner, outline with SC-15 Tuxedo. Eyes are SC-16 Cotton Tail with a dot of SC-15 Tuxedo for a pupil.
- Using a CB-604 #4 Soft Fan, apply 2 coats of S-2101 Crystal Clear Brushing. Allow to dry.
- Stilt and fire to shelf cone 06/05.