Tidal Pool, Gold Mine Finial Jar

• Print
• Email

Details

Last Updated: Friday, 10 May 2019 14:53

Designer: Marcia Roullard

 

Instructions

1. Remove dust with a damp sponge from 04 bisque.
2. Thin slightly EL-139 Nectar, pour to the inside, roll, pour out excess.
3. Brush on three coats, recede last coat one inch, of EL-120 Black Ice on the lid and the base.
4. Brush on 4 coats of EL-139 Nectar to the top 1 1/2inches of the middle section with CB-604 Soft Fan.
5. Brush on three coats of EL-106 Tidal Pool to the middle section overlapping onto the Nectar 1/2 inch.
6. Brush on one heavy coat of PC-601 Clear Cascade to the middle section with CB-604 Soft Fan.
7. Plop EL-207 Gold Mine to the middle section, recede from the top ring at the base at least an inch.  Leave spaces between plops.
8. Plop but less than the Gold Mine, PC-602 White Cascade, and EL-139 Nectar, receding from the base.
9. Vein with SC-15 Tuxedo using CB-110 Liner, and stamp with the ST-127 Crackle Stamp the middle section.
10. Stilt both the lid and the base and fire to cone 06.