Metallic Cross

• Print
• Email

Details

Last Updated: Tuesday, 29 April 2014 14:40

1. Place some SS-138 Flat Black onto a foam plate. Using a AB-834 ¾" Base Coat brush, apply 1 -2 coats of SS-138 Flat Black to the entire piece. Allow to dry.
2. Place some MM-106 Steel Metallic onto a foam plate.
3. Using a AB-902 #2 Stiff Fan, apply 1 coat of MM-106 Steel Metallic to the piece, except the raised areas that will be patina, to which 1 coat of MM-105 Gold Metallic is applied. Allow to dry.
4. Apply a second coat of the MM-106 Steel Metallic and MM-105 Gold Metallic. While still wet, spritz heavy with MM-305 Rapid Rust. As it dries the Rust and Patina will begin to develop. Allow to dry overnight.
5. Option: Apply 2 coats of MM-502 Matte Sealer, using a AB-834 ¾" Base Coat Brush. Allow to dry.
6. Referring to the photo, you can also trim with some MM-105 Gold Metallic using a CB-110 #10/0 Liner.