Ninja Eye Plate & Mug

Fantasy time: be what you wanna be.  In this case - a ninja!



Products Used

Bisque
  • MB-1324 - Plate with Eyes
  • MB-1325 - Mug with Eyes
Color
  • FN-009 - Black
  • SC-15 -Tuxedo
  • SC-16 - Cotton Tail
  • SC-20 - Cashew Later
  • SC-76 - Cara-Bein Blue
  • NT-CLR - Clear One Dipping (optional)
Decorating Accessories
  • BT-910 - Synthetic Sponges
  • CB-106 - #6 Script Liner
  • CB-110 - #10/0 Liner
  • CB-202 - #2 Detail Liner
  • CB-604 - #4 Soft Fan
Ninja_Eye_Plate__Mug
Additional Materials
  • Pencil
  • ½" Masking Tape
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1 hour

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. With ½ inch masking tape, tape around the eyes to create the mask.
  3. Using a CB-106 #6 Script Liner, apply 3 coats of SC-20 Cashew Later to the face areas avoid the eye area. Remove the masking tape before the last coat of SC-20 Cashew Later dries.
  4. Using a CB-604 #4 Soft Fan, apply 3 coats of SC-15 Tuxedo to the remaining area of the top side of the plate.
  5. Using a CB-202 #2 Detail Liner, apply 2 coats of SC-16 Cotton Tail to the eye area. Apply 2 thinned coats of SC-76 Cara-bein Blue to the iris of the eye. Apply 1–2 coats of SC-15 Tuxedo to the pupil of the eye. Add a highlight of SC-16 Cotton Tail.
  6. Using a CB-110 #10/0 Liner, outline the eye with SC-15 Tuxedo.
  7. Using a CB-604 #4 Soft Fan, apply 2 -3 coats of FN-009 Black to the back of the plate and inside the mug. Allow to dry.
  8. Optional: Can be dipped in clear glaze. Allow to dry.
  9. Stilt and fire to shelf cone 06.

custom-css-security