Opals & Copper Wash
- Details
- Last Updated: Tuesday, 23 April 2019 17:48
Products Used
Bisque- SB-113 12" Vase
- Hand-Thrown Shape
- SW-253 Green Opal
- SW-255 Gray Opal
- SW-304 Copper Wash
- BT-910 Synthetic Sponge
- CB-604 #4 Soft Fan
Designer: Nate Klein
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using CB-064 #4 Soft Fan, apply one coat thinned coat of SW-304 Copper Wash to exterior of piece leaving ½” band at the bottom without wash.
- Using CB-106 Script Liner, brush one coat of SW-304 Copper Wash to the interior and exterior of the rim.
- Using CB-604 #4 Soft Fan, apply 2 coats SW-255 Gray Opal to the exterior of the piece allowing for the glaze to dry between each coat.
- Using CB-604 #4 Soft Fan, apply 2 coats SW-253 Green Opal to the exterior of the piece allowing for the glaze to dry between each coat.
- Using CB-604 #4 Soft Fan, Apply 3 coats of SW-255 Gray Opal to the interior of the piece.
- Using a damp sponge, remove any excess glaze from the bottom of the piece.
- Do not stilt. Fire to cone 5/6.