Stroke & Coat® with SW-401 Flux

• Print
• Email

Details

Last Updated: Friday, 27 January 2017 13:50

Designer: Marcia Roullard

 

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. To the top 2/3 of the vase, apply 2 coats of SC-74 Hot Tamale using CB-604 #4 Soft Fan Brush, allowing drying time between coats.
3. To the bottom 2/3 of vase, apply 2 coats of SC-75 Orange-A-Peel using CB-604 #4 Soft Fan Brush, allowing drying time between coats.
4. To the top 1/4 of vase, apply 3 coats of SW-401 Mayco Flux using CB-604 #4 Soft Fan Brush, allow drying time between coats. 
5. Fire to cone 6.

As seen in Mayco's Ad: Ceramics Monthly - September Issue.