Stroke and Coat Flux Tumbler

• Print
• Email

Details

Last Updated: Monday, 04 February 2019 18:58

 

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Apply 2 coats of any combination of the Stroke and Coat glazes. I applied 2 glazes, blending in the middle. Be sure to leave ¼” from the bottom and do not glaze the very bottom.
3. Add 2 coats of SW-401 Light Flux to the top ½”-1” of the tumbler.
4. Use a clean sponge to wipe the bottom clean any glaze that may have gotten out of place.
5. Let dry completely and fire in oxidation to cone 6.