3" Cactus Ornament

IMG 3747 cactus

 

Products Used

Bisque
  • MB-1172 3” Flat Round  Ornament

Color
  • SC-8 Just Froggy
  • SC-15 Tuxedo
  • SC-45 My Blue Heaven
  • SC-73 Candy Apple Red   
  • SG-302 Snowfall
  • SG-401 Black
  • SG-403 Red
  • SG-404 Blue
  • SG-407 Yellow
  • NT-CLR Clear Dipping Glaze or NT-BR Clear One Brushing Glaze

Decorating Accessories

  • RB-144 #4 Soft Fan
  • RB-106 #6 Script Liner
  • RB-110 #10/0 Detail Liner
  • AC-310 Silkscreen Medium
  • DSS-0156 Llama Drama

Miscellaneous Accessories

  • Palette
  • Palette Knife
  • Permanent Marker
  • Scissors
  •  Pencil 

 

Designer: Elizabeth Carey
 
Instructions
  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. On the DSS-0156 Llama Drama screen, locate the cactus. Draw an outline around it in permanent marker. Cut it out with excess screen around the edges.
  3. Squeeze about two tablespoons of SC-15 Tuxedo onto the plate. Add a pinch of AC-310 Silkscreen Medium. Mix with a palette knife until it becomes the consistency of peanut butter. You may need to add more Silkscreen Medium or glaze.
  4. Place the cactus in the center of the ornament. While holding it firmly in place, take a small amount of premixed Silkscreen Medium, and gently rub in circles starting in the center and working outward. Slowly pull up the screen to avoid smearing.
  5. Using the pencil, draw a Santa hat on top of the cactus.
  6. Using the Script Liner with SC-8 Just Froggy, apply two coats to the cactus. Allow glaze to dry between coats.
  7. Using the Detail Liner with SC-73 Candy Apple Red, apply two coats to the Santa hat. Allow glaze to dry between coats.
  8. Using the Detail Liner, Script Liner and Soft Fan with SC-45 My Blue Heaven, apply two coats to the background, sides and back of the ornament. Allow glaze to dry between coats.
  9. Using the Detail Liner with SG-302 Snowfall, make dots in the background and fur on the hat.
  10. Using the Detail Liner with SC-15 Tuxedo, outline the Santa hat.
  11. Use SG-401 Black to make lines crossing the body of the cactus. It should look like lights wrapping around the cactus.
  12. Use SG-403 Red, SG-404 Blue and SG-407 Yellow to make lights coming off of the black lines.
  13. Using the Soft Fan, apply one coat of S-2101 Clear Brushing Glaze or dip into NT-CLR Clear Dipping Glaze.
  14. Fire to cone 06.

custom-css-security