Grinch Ornament Footprint

Products Used

Bisque
  • MB-882 Rectanggle Tray
Color
  • SC-15 Tuxedo
  • SC-16 Cotton Tail
  • SC-27 Sour Apple
  • SC-74 Hot Tamale
  • FN-001 White
  • FN-009 Black
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponges
  • AC-230 Clay Carbon Paper
Grinch_Ornament_Footprint
Additional Materials
Project Info

Instructions


  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-001 White to the front of the plate. Allow to dry.
  3. Apply 3 coats of FN-009 Black to the back of the plate. This can be done now, or after you finish the design to speed up the drying process.
  4. Using a pencil and AC-230 Clay Carbon Paper, trace the design onto the plate.
  5. Using a CB-106 #6 Script Liner, apply 3 coats of SC-27 Sour Apple to the hand, SC-74 Hot Tamale on the sleeve and ornament, SC-16 Cotton Tail on the cuff, and SC-15 Tuxedo on swirls.
  6. Using a CB-110 #10/0 Liner, apply 1 coat of SC-15 Tuxedo for the line work on the hand and ornament.
  7. Using a BT-910 Synthetic Sponge liberally apply SC-16 Cotton Tail to the Child’s foot.
  8. Immediately press foot onto the center of the ornament pulling it straight off.
  9. Don’t forget to paint the back of the plate if you have not already done so.
  10. Allow the plate to dry completely.
  11. Stilt and fire to shelf cone 05/06

custom-css-security