Bumkin Tray
- Details
- Last Updated: Wednesday, 09 October 2019 16:09
Products Used
Bisque- MB-1486 Rustic Tray
- FN-301 Marshmallow White
- SC-24 Dandelion
- SC-26 Green Thumb
- SC-34 Down to Earth
- SC-36 Irish Luck
- SC-48 Camel Back
Decorating Accessories
- AC-230 Clay Carbon Paper
- RB-144 #4 Soft Fan
- RB-106 #6 Script Liner
- RB-110 10/0 Detail Liner
Decorating Accessories
- Sponge, water, palette, pencil, sponge on a stick
- Baby's bottom
- Dagger brush
- Pattern: Download
Instructions
-
Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
-
Using the Soft Fan with FN-301 Marshmallow White, apply 4 coats to the front and back of the tray. Allow glaze to dry between coats.
-
Squeeze around 2 TBS of SC-24 Dandelion onto the palette. Dip the sponge on a stick into the glaze and sponge the baby’s bottom. Take the tray and press the center against the baby’s bottom. Allow glaze to dry completely.
-
Place the AC-230 Clay Carbon Paper onto the tray. Position the pattern so that the stem and leaves are above the print. Trace the pattern using the pencil.
-
Using the Script Liner with SC-48 Camel Back, apply 1 coat to the stem.
-
Using the Detail Liner with SC-34 Down to Earth, make accent lines on the edges of the stem.
-
Using the Script Liner with SC-26 Green Thumb, apply 1 coat to the leaves.
-
Using the Detail Liner with SC-36 Irish Luck, make accent lines on the leaves.
-
Use the pencil to sketch the lettering. Using the Detail Liner with SC-34 Down to Earth, apply 1 coat to the lettering.
-
Squeeze 1 TBS of SC-24 Dandelion onto the palette. Thin with water. Use the dagger brush to go around the edges of the platter.
-
Fire to cone 06.