Fireworks Tray
- Details
- Last Updated: Monday, 23 October 2017 18:06
Bisque
- MB-1307 Handled Platter
- SC-16 Cotton Tail
- SC-31 The Blues
- SC-74 Hot Tamale
- SC-75 Cara-bein Blue
- S-2731 Kaboom
- FN-004 Red
- SG-401 Black Designer Liner
- SG-403 Red Designer Liner
- SG-404 Blue Designer Liner
- S-2101 Crystal Clear Brushing
- CB-106 #6 Script Liner
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponge
- AC-230 Clay Carbon Paper
- Designer: Marcia Roullard
- Skill Level: Basic
- Time: 1½ hours
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- With a pencil and AAC-230 Clay Carbon Paper, trace on the pattern.
- Using a CB-106 #6 Script Liner, apply 2 coats of SC-74 Hot Tamale to the red letters, and part of the rocket, stroking in some SC-16 Cotton Tail into the red on the right side of the letters, add a little SC-15 Tuxedo to the Hot Tamale to the left side of the letters to shade.
- Using a CB-106 #6 Script Liner, apply SC-76 to the blue letters with SC-31 The Blues to the right side, add a little SC-15 Tuxedo to the Cara-bein Blue on the left side for the last coat. Apply 2 coats. Apply the same for the blue rocket area.
- Using a CB-106 #6 Script Liner, apply 1 coat of S-2731 Kaboom to the stars, with crystals, and the centers of all the bursts of fireworks, apply 2 thinned coats of SC-76 Cara-bein Blue to the stars over the S-2731 Kaboom.
- Use SG-404 Blue Designer Liner and SG-403 Red Designer Liner to make the red and blue lines from the rocket and stars, and fireworks.
- Outline all the letters with SG-401 Black Designer Liner.
- Using a CB-604 #4 Soft Fan, apply 2 coats of S-2101 Crystal Clear Brushing to the inside of the platter, brushing around the stars, though its okay to overlap them.
- Using a CB-604 #4 Soft Fan, apply 3 coats of FN-004 Red to the back of the platter. Allow to dry.
- Stilt and fire to shelf cone 06/05.