Tailgate Camper Dish & Mug
- Details
- Last Updated: Thursday, 01 August 2019 17:31
Products Used
Bisque- MB-1531 Camper Mug
- MB-1542 Camper Dish
- SC-15 Tuxedo
- SC-26 Green Thumb
- SC-35 Gray Hare
- SC-48 Camel Back
- SC-60 Silver Lining
- SC-74 Hot Tamale (mug only)
- SP-215 Speckled Tuxedo
- SP-260 Speckled Silver Lining
- SP-274 Speckled Hot Tamale
- NT-CLR Clear Dipping Glaze or S-2101 Clear Brushing Glaze
Decorating Accessories
- AC-310 Silkscreen Medium
- DSS-0156 Llama Drama
- MC-001 6mm Low Track Masking Tape
- RB-106 #6 Script Liner
- RB-110 10/0 Detail Liner
Miscellaneous Accessories
- Sponge
- water
- Palette
- Palette Knife
- Scissors
- Permanent Marker
Instructions
-
Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
-
Using the Script Liner with SP-274 Speckled Hot Tamale, apply 3 coats to the top half of the camper. Allow glaze to dry between coats.
-
Using the Script Liner with SP-260 Speckled Silver Lining, apply 3 coats to the lower half of the camper. Allow glaze to dry between coats.
-
Using MC-001 6mm Low Track Masking Tape, apply to the door to look like laces on a football.
-
Using the Script Liner with SC-48 Camel Back, apply 3 coats to the door. Allow glaze to dry between coats. Remove the tape before the last coat has dried.
-
Using the Script Liner with SC-60 Silver Lining apply 1 coat to the windows. After the first coat is dry, apply another coat and shade with SC-35 Gray Hare.
-
Using the Script Liner with SC-35 Gray Hair, apply 3 coats to the fenders and hubcaps. Allow glaze to dry between coats.
-
Using the Script Liner with SP-215 Speckled Tuxedo, apply 2 coats to the tires. Allow glaze to dry between coats.
-
Squeeze around 2 tbs of SC-15 Tuxedo onto the palette. Add a pinch of AC-310 Silkscreen Medium and mix with a palette knife until it becomes the consistency of peanut butter. You might need to add more silkscreen medium or glaze.
-
Locate the banner on the DSS-0156 Llama Drama screen. Use a permanent marker to make an outline around the banner. Use the scissors to cut it out. Make sure to leave extra screen around the edges.
-
Take the banner and place it over the window. Hold it in place while you take a small amount of premixed silkscreen medium and gently rub in circles over the screen. Carefully lift the screen to avoid smearing.
-
Using the Detail Liner with SC-26 Green Thumb, apple 2 coats to the banner. Allow glaze to dry between coats.
-
Using the Detail Liner with SC-15 Tuxedo, outline the details on the camper. Write “TEAM!” on the banner and “#1” in the window.
-
For the mug, apply 3 coats of SC-74 Hot Tamale to the inside using the Soft Fan. Allow glaze to dry between coats.
-
Using the Soft Fan with SC-15 Tuxedo, apply 2 coats to the back of the dish and the bottom of the mug. Allow glaze to dry between coats.
-
Using the Script Liner with S-2101 Clear Brushing Glaze, apply 2 coats over the laces. Allow glaze to dry between coats. Or dip into NT-CLR Clear Dipping Glaze.
-
Fire to cone 06.