Fall Pumpkin and Gourd Platter
- Details
- Last Updated: Friday, 11 October 2019 15:26
Products Used
Bisque- MB-1307 Handled Platter
- FN-301 Marshmallow White
- SC-8 Just Froggy
- SC-15 Tuxedo
- SC-48 Camel Back
- SC-50 Orange Ya Happy
- SC-51 Poo Bear
- SC-52 Toad-ily Green
- SC-97 Cant-elope
Decorating Accessories
- AC-230 Clay Carbon Paper
- RB-144 #4 Soft Fan
- RB-106 #6 Script Liner
- RB-110 10/0 Detail Liner
Decorating Accessories
- Sponge, Water, pencil
- Pattern: Download
Instructions
-
Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
-
Using the Soft Fan with FN-301 Marshmallow White, apply 4 coats to the front and back of the platter. Allow glaze to dry between coats. The final coat must be completely dry before moving onto the next step.
-
Place the AC-230 Clay Carbon Paper onto the platter. Position the pattern in the center of the platter and trace it with a pencil.
-
Using the Script Liner with SC-97 Cant-elope, apply 3 coats to the small pumpkin on the left. Allow glaze to dry between coats.
-
Using the Script Liner with SC-50 Orange Ya Happy, apply 3 coats to the large pumpkin in the center. Allow glaze to dry between coats.
-
Using the Script Liner with SC-51 Poo Bear, apply 3 coats to the medium pumpkin on the right. Allow glazes to dry between coats.
-
Using the Script Liner with SC-52 Toad-ily Green, apply 3 coats to the gourd. Allow glaze to dry between coats.
-
Using the Script Liner with SC-8 Just Froggy, apply 3 coats to the leaves and stem of the small pumpkin on the left. Allow glaze to dry between coats.
-
Using the Script Liner with SC-48 Camel Back, apply 3 coats to the remaining stems. Allow glaze to dry between coats.
-
Using the Detail Liner with SC-15 Tuxedo, outline everything and add accent lines.
-
Fire to cone 06.