Strawberry Salad Plate
- Details
- Last Updated: Monday, 20 May 2019 19:14
Bisque
- MB-1293 - Rectangle Dinnerware - Salad Plate
- FN-001 - White
- FN-004 - Red
- SC-6 - Sunkissed
- SC-15 - Tuxedo
- SC-26 - Green Thumb
- SC-36 - Irish Luck
- SC-74 - Hot Tamale
- SC-78 - Lime Light
- SC-87 - Rubby Slippers
- BT-910 - Synthetic Sponges
- CB-106 - #6 Script Liner
- CB-110 - #10/0 Liner
- CB-604 - #4 Soft Fan
- AC-213 - Sponge on a Stick
- ST-341 - Leaves Stamp
- Pencil
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using a CB-604 # 4 Soft fan, apply 2 coats of FN-001 White to the top of the plate and 3 coats of FN-004 Red to the back and edges. Allow to dry.
- Load the AC-213 Sponge on a Stick with SC-26 Green Thumb, and apply to one leaf at a time and stamp at random the border of the plate.
- Using a CB-106 # 6 Script Liner, apply a thinned coat of SC-78 Lime Light to the leaves.
- Using a CB-106 # 6 Script Liner with SC-74 Hot Tamale and block in the strawberries where desired.
- Side load the CB-106 # 6 Script Liner with SC-87 Ruby Slippers and shade one side of each strawberry, then the opposite side with SC-6 Sunkissed.
- Load the CB-110 # 10/0 Liner with SC-36 Irish Luck, and add the tops and stems to each strawberry.
- Load the CB-110 # 10/0 Liner with SC-15 Tuxedo and outline the strawberries, caps and add small dots on one side of each strawberry.
- Stilt and fire to Shelf Cone 06.