Star of David - Set
- Details
- Last Updated: Friday, 03 November 2017 16:54
Products Used
Bisque- MB-102 Coupe Dinner Plate
- MB-1067 Kiddush Cup
- SC-6 Sunkissed
- SC-11 Blue Yonder
- SC-31 The Blues
- SC-45 My Blue Heaven
- SC-76 Cara-bein Blue
- SG-402 White
- SG-404 Blue
- SG-407 Yellow
- SG-410 Bright Blue
- S-2101 Crystal Clear Brushing
Decorating Accessories
- AC-230 Clay Carbon Paper
- BT-910 Synthetic Sponge
- CB-404 #4 Pointed Round
- CB-604 #4 Soft Fan
Additional Materials
- Pencil
- Scissors
-
Download: Pattern
Designer: Adena Griffith
Instructions
MB-102 Coupe Dinner Plate:
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using CB-604 #4 Soft Fan, apply 3 coats of SC-11 Blue Yonder to the back of the MB-102 Coupe Dinner Plate.
- Using scissors, cut out the stars from the pattern. Using water, place the paper star cut outs onto the top of the plate, as shown. This will act as a mask.
- Using CB-604 #4 Soft fan, apply 3 coats of SC-76 Cara-Bein to the top of the plate, over the paper star cut outs. Once the third coat has lost its shine, remove the paper from the plate.
- Puddle in SC-6 Sunkissed, SC-11 Blue Yonder, and SC-45 My Blue Heaven into the star shapes using a CB-404 #4 Pointed Round.
- Once the stars are dry add in the dots using SG-410 Bright Blue, SG-407 Yellow, SG-404 Blue, SG-402 White.
- Once the dots are dry, apply one heavy coat of S-2101 Crystal Clear Brushing using a CB-604 #4 Soft Fan brush.
- Stilt and fire to cone 06.
MB-1067 Kiddush Cup:
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using CB-604 #4 Soft Fan, apply 3 coats of SC-31 The Blues to the handle of the MB-1067 Kiddush Cup.
- Using CB-604 #4 Soft Fan, apply 3 coats of SC-76 Cara-Bein to the inside of the cup.
- Using AC-230 Clay Carbon Paper and a pencil, trace the pattern onto the cup.
- Using CB-404 #4 Pointed Round, apply 3 coats of SC-6 Sunkissed to the inside of the star.
- Using SG-404 Blue, apply the dots to the outside of the star.
- On the top and the bottom of the handle, use SG-402 White and SG-406 Yellow to apply dots.
- Once dry, apply 2 coats of S-2101 Crystal Clear Brushing glaze to the exterior, including handle, using a CB-604 #4 Soft Fan brush.
- Stilt and fire to cone 06.