Zombie Platter
- Details
- Last Updated: Wednesday, 20 May 2020 14:51
Products Used
Bisque- SB-118 12” Oval Platter
Color
- SW-137 Storm Gray
- SW-140 Black Matte
- SW-148 Lime Shower
- SW-207 Chambray
- SW-001 Stoneware Clear
- SG-401 Designer Liner Black
- SG-403 Designer Liner Red
Decorating Accessories
- AC-230 Clay Carbon Paper
- CB-604 #4 Soft Fan
- CB-106 Script Liner
- AC-222 Large Bottle and Writer Tip
Additional Materials
- Sponge
- Ball Point Pen
- Pattern
Designer: Laura Fraedrich
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using the CB-604 Soft Fan Brush, apply 3 coats of SW-140 Black Matte to the back sides and the front rim of the platter. Do not glaze the bottom or the foot.
- Using the carbon paper and a pencil, transfer the pattern onto the platter.
- Using the SG-401 Black Designer Liner, draw over the lines from the pattern. Color in the pupil of the right eye.
- Using the SG-403 Designer Liner Red, draw in the zig zags on the shirt, the squiggles between the black lines in the hair, and color in the x on the left eye.
- Using the CB-604 Soft Fan, apply three coats of SW-137 Storm Gray to the areas around the zombie, even over the hair. The Designer Liner lines will show through the glazes once fired. Use a CB-106 Script Liner to get into the tight areas. Apply 2 coats to the right eyelid.
- Using the CB-106 Script Liner, apply three coats of SW-148 Lime Shower to the face, neck, arms and legs of the zombie.
- Using the CB-106 Script Liner, apply three coats of SW-207 Chambray to the shirt and the iris of the right eye.
- Using the script liner, apply 2 coats of SW-001 Stoneware Clear to the eyes and the teeth.
- Do not stilt or hang over the edge of the kiln shelf.
- Fire to cone 5/6.