Go Red For Women
- Details
- Last Updated: Thursday, 16 June 2016 17:07
Bisque
- MB-1230 - "Cause" Plate with Raised Ribbon
- FN-001 - White
- SC-15 - Tuxedo
- SC-87 - Ruby Slippers
- AC-213 - Sponge on a Stick - 1¼"Diameter
- BT-910 - Synthetic Sponges
- CB-106 - #6 Script Liner
- CB-604 - #4 Soft Fan
- ST-114 - Starry Swirls
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using a CB-604 #4 Soft Fan, apply 2 coats of FN-001 White to the front and back of the plate. Allow to dry.
- Cut out the paper pattern of the dress. Position the cut out pattern on the plate and trace the shape with a pencil. Remove cut out pattern.
- Cut out a small heart out of the scrap paper.
- Wet the heart and place on the left side of the traced dress.
- Using a CB-106 #6 Script Liner, apply 1 coat of SC-87 Ruby Slippers on the dress shape on the plate.
- Using a CB-604 #4 Soft Fan apply a coat of SC-87 Ruby Slippers to the back side of the dress cut out pattern and place over the painted dress on the plate. Press in place.
- With a damp sponge remove any of the SC-87 Ruby Slippers that seeps out from under the paper.
- Using a CB-604 #4 Soft Fan, apply a coat of FN-001 White around the dress. Allow to dry.
- Using the AC-213 Sponge on a Stick load the sponge with SC-15 Tuxedo. Tap the SC-15 Tuxedo onto the ST-114 Starry Swirls Stamp then stamp in the random fashion all around the dress pattern. Allow to dry.
- When dry, tap some SC-15 Tuxedo very sparingly to the outline of the dress with the AC-213 Sponge on a Sick.
- Remove the paper dress and heart.
- Using a CB-106 #6 Script Liner, apply 2-3 coats of SC-87 Ruby Slippers on the ribbon on the plate.
- Stilt and fire to shelf cone 05/06.